dmesg - ASUS AMD Radeon
Linux version 4.15.7-1-ARCH (builduser@heftig-14534) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Wed Feb 28 19:01:57 UTC 2018
Command line: amdgpu.dc=1 root=/dev/sda2 ro initrd=arch\initramfs-linux.img
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000da0e4fff] usable
BIOS-e820: [mem 0x00000000da0e5000-0x00000000db5e0fff] reserved
BIOS-e820: [mem 0x00000000db5e1000-0x00000000db601fff] ACPI data
BIOS-e820: [mem 0x00000000db602000-0x00000000dbab2fff] ACPI NVS
BIOS-e820: [mem 0x00000000dbab3000-0x00000000dc857fff] reserved
BIOS-e820: [mem 0x00000000dc858000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xcb810018-0xcb821057] usable ==> usable
e820: update [mem 0xcb810018-0xcb821057] usable ==> usable
e820: update [mem 0xcb7f2018-0xcb80f257] usable ==> usable
e820: update [mem 0xcb7f2018-0xcb80f257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000003ffffff] usable
reserve setup_data: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
reserve setup_data: [mem 0x000000000400a000-0x0000000009cfffff] usable
reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x00000000cb7f2017] usable
reserve setup_data: [mem 0x00000000cb7f2018-0x00000000cb80f257] usable
reserve setup_data: [mem 0x00000000cb80f258-0x00000000cb810017] usable
reserve setup_data: [mem 0x00000000cb810018-0x00000000cb821057] usable
reserve setup_data: [mem 0x00000000cb821058-0x00000000da0e4fff] usable
reserve setup_data: [mem 0x00000000da0e5000-0x00000000db5e0fff] reserved
reserve setup_data: [mem 0x00000000db5e1000-0x00000000db601fff] ACPI data
reserve setup_data: [mem 0x00000000db602000-0x00000000dbab2fff] ACPI NVS
reserve setup_data: [mem 0x00000000dbab3000-0x00000000dc857fff] reserved
reserve setup_data: [mem 0x00000000dc858000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041f37ffff] usable
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xdb5e7000 ACPI=0xdb5e7000 SMBIOS=0xdc71b000 SMBIOS 3.0=0xdc71a000 ESRT=0xd7cb5f98 MEMATTR=0xd7a3c018
random: fast init done
SMBIOS 3.1.1 present.
DMI: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6001 02/09/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d7cb5f98 to 0x00000000d7cb5fd0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 96000 size 24576
Using GB pages for direct mapping
BRK [0x3e563a000, 0x3e563afff] PGTABLE
BRK [0x3e563b000, 0x3e563bfff] PGTABLE
BRK [0x3e563c000, 0x3e563cfff] PGTABLE
BRK [0x3e563d000, 0x3e563dfff] PGTABLE
BRK [0x3e563e000, 0x3e563efff] PGTABLE
BRK [0x3e563f000, 0x3e563ffff] PGTABLE
BRK [0x3e5640000, 0x3e5640fff] PGTABLE
BRK [0x3e5641000, 0x3e5641fff] PGTABLE
BRK [0x3e5642000, 0x3e5642fff] PGTABLE
BRK [0x3e5643000, 0x3e5643fff] PGTABLE
BRK [0x3e5644000, 0x3e5644fff] PGTABLE
BRK [0x3e5645000, 0x3e5645fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x7f92c000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DB5E7000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DB5E7098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DB5F0498 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
ACPI: DSDT 0x00000000DB5E71E0 0092B1 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DBA9BE00 000040
ACPI: APIC 0x00000000DB5F05B0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DB5F0690 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DB5F06D8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DB5F0778 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DB5F9410 002314 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DB5FB728 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DB5FC678 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DB5FC6A8 002DA5 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DB5FF450 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DB5FF790 001993 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: HPET 0x00000000DB5FF4E8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DB5FF520 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DB5FF548 000042 (v01 00000000 00000000)
ACPI: BGRT 0x00000000DB5FF590 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DB5FF5C8 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DB5FF698 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f37d000-0x41f37ffff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x000000000400a000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000da0e4fff]
node 0: [mem 0x00000000dc858000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4176002
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14038 pages used for memmap
DMA32 zone: 898403 pages, LIFO batch:31
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:31
Reserved but unavailable: 97 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0xcb7f2000-0xcb7f2fff]
PM: Registered nosave memory: [mem 0xcb80f000-0xcb80ffff]
PM: Registered nosave memory: [mem 0xcb810000-0xcb810fff]
PM: Registered nosave memory: [mem 0xcb821000-0xcb821fff]
PM: Registered nosave memory: [mem 0xda0e5000-0xdb5e0fff]
PM: Registered nosave memory: [mem 0xdb5e1000-0xdb601fff]
PM: Registered nosave memory: [mem 0xdb602000-0xdbab2fff]
PM: Registered nosave memory: [mem 0xdbab3000-0xdc857fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ (ptrval) s147456 r8192 d28672 u262144
pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 4110724
Policy zone: Normal
Kernel command line: amdgpu.dc=1 root=/dev/sda2 ro initrd=arch\initramfs-linux.img
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16267040K/16704008K available (10252K kernel code, 1250K rwdata, 3224K rodata, 1432K init, 632K bss, 436968K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 31419 entries in 123 pages
Preemptible hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 7 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3592.851 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7185.70 BogoMIPS (lpj=3592851)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Freeing SMP alternatives memory: 24K
smpboot: CPU0: AMD Ryzen 7 1800X Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (114971.23 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xdb602000-0xdbab2fff] (4919296 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 23:12:59, date: 03/06/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xefff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 01-09]
pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D3hot D3cold
pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:02:05.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:05.0: PME# supported from D3hot D3cold
pci 0000:02:06.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:06.0: PME# supported from D3hot D3cold
pci 0000:02:07.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:07.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-09]
pci 0000:01:00.2: bridge window [io 0xe000-0xefff]
pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:03:00.0: [1b21:1343] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe600000-0xfe607fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:04:00.0: [8086:1539] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfe500000-0xfe51ffff]
pci 0000:04:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:04:00.0: reg 0x1c: [mem 0xfe520000-0xfe523fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0xe000-0xefff]
pci 0000:02:02.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:02:03.0: PCI bridge to [bus 05]
pci 0000:02:04.0: PCI bridge to [bus 06]
pci 0000:02:05.0: PCI bridge to [bus 07]
pci 0000:02:06.0: PCI bridge to [bus 08]
pci 0000:02:07.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: [1002:7300] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:0a:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:0a:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:0a:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
pci 0000:0a:00.0: BAR 0: assigned to efifb
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0a:00.1: [1002:aae8] type 00 class 0x040300
pci 0000:0a:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
pci 0000:0a:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0b:00.0: [1022:145a] type 00 class 0x130000
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:0b:00.2: [1022:1456] type 00 class 0x108000
pci 0000:0b:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
pci 0000:0b:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
pci 0000:0b:00.2: enabling Extended Tags
pci 0000:0b:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:0b:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
pci 0000:0b:00.3: enabling Extended Tags
pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
pci 0000:0c:00.0: [1022:1455] type 00 class 0x130000
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.2: [1022:7901] type 00 class 0x010601
pci 0000:0c:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
pci 0000:0c:00.2: enabling Extended Tags
pci 0000:0c:00.2: PME# supported from D3hot D3cold
pci 0000:0c:00.3: [1022:1457] type 00 class 0x040300
pci 0000:0c:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
pci 0000:0c:00.3: enabling Extended Tags
pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:0a:00.0: vgaarb: setting as boot VGA device
pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:0a:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xcb7f2018-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb810018-0xcbffffff]
e820: reserve RAM buffer [mem 0xda0e5000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x02a0-0x02af] has been reserved
system 00:03: [io 0x0230-0x023f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0xe000-0xefff]
pci 0000:02:02.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:02:03.0: PCI bridge to [bus 05]
pci 0000:02:04.0: PCI bridge to [bus 06]
pci 0000:02:05.0: PCI bridge to [bus 07]
pci 0000:02:06.0: PCI bridge to [bus 08]
pci 0000:02:07.0: PCI bridge to [bus 09]
pci 0000:01:00.2: PCI bridge to [bus 02-09]
pci 0000:01:00.2: bridge window [io 0xe000-0xefff]
pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:00:01.3: PCI bridge to [bus 01-09]
pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xefff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe7fffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe6fffff]
pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0a: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xfe200000-0xfe4fffff]
pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6988K
AMD-Vi: IOMMU performance counters supported
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.3 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:03.0 to group 3
iommu: Adding device 0000:00:03.1 to group 4
iommu: Adding device 0000:00:04.0 to group 5
iommu: Adding device 0000:00:07.0 to group 6
iommu: Adding device 0000:00:07.1 to group 7
iommu: Adding device 0000:00:08.0 to group 8
iommu: Adding device 0000:00:08.1 to group 9
iommu: Adding device 0000:00:14.0 to group 10
iommu: Adding device 0000:00:14.3 to group 10
iommu: Adding device 0000:00:18.0 to group 11
iommu: Adding device 0000:00:18.1 to group 11
iommu: Adding device 0000:00:18.2 to group 11
iommu: Adding device 0000:00:18.3 to group 11
iommu: Adding device 0000:00:18.4 to group 11
iommu: Adding device 0000:00:18.5 to group 11
iommu: Adding device 0000:00:18.6 to group 11
iommu: Adding device 0000:00:18.7 to group 11
iommu: Adding device 0000:01:00.0 to group 12
iommu: Adding device 0000:01:00.1 to group 12
iommu: Adding device 0000:01:00.2 to group 12
iommu: Adding device 0000:02:00.0 to group 12
iommu: Adding device 0000:02:02.0 to group 12
iommu: Adding device 0000:02:03.0 to group 12
iommu: Adding device 0000:02:04.0 to group 12
iommu: Adding device 0000:02:05.0 to group 12
iommu: Adding device 0000:02:06.0 to group 12
iommu: Adding device 0000:02:07.0 to group 12
iommu: Adding device 0000:03:00.0 to group 12
iommu: Adding device 0000:04:00.0 to group 12
iommu: Adding device 0000:0a:00.0 to group 13
iommu: Using direct mapping for device 0000:0a:00.0
iommu: Adding device 0000:0a:00.1 to group 13
iommu: Adding device 0000:0b:00.0 to group 14
iommu: Adding device 0000:0b:00.2 to group 15
iommu: Adding device 0000:0b:00.3 to group 16
iommu: Adding device 0000:0c:00.0 to group 17
iommu: Adding device 0000:0c:00.2 to group 18
iommu: Adding device 0000:0c:00.3 to group 19
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=44 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.3: AER enabled with IRQ 28
pcieport 0000:00:03.1: AER enabled with IRQ 29
pcieport 0000:00:07.1: AER enabled with IRQ 30
pcieport 0000:00:08.1: AER enabled with IRQ 32
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 9000k, total 9000k
efifb: mode is 1920x1200x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x75
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001129
microcode: CPU1: patch_level=0x08001129
microcode: CPU2: patch_level=0x08001129
microcode: CPU3: patch_level=0x08001129
microcode: CPU4: patch_level=0x08001129
microcode: CPU5: patch_level=0x08001129
microcode: CPU6: patch_level=0x08001129
microcode: CPU7: patch_level=0x08001129
microcode: CPU8: patch_level=0x08001129
microcode: CPU9: patch_level=0x08001129
microcode: CPU10: patch_level=0x08001129
microcode: CPU11: patch_level=0x08001129
microcode: CPU12: patch_level=0x08001129
microcode: CPU13: patch_level=0x08001129
microcode: CPU14: patch_level=0x08001129
microcode: CPU15: patch_level=0x08001129
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (394184545, 0)->(549471108, -155286563)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 10:41:251
pci 0000:0a:00.1: hash matches
memory memory125: hash matches
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel memory: 1432K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 872K
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000418
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.7-1-ARCH xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.7-1-ARCH xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
ahci 0000:01:00.1: version 3.0
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 44
ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 44
ata3: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780200 irq 44
ata4: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780280 irq 44
ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 44
ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 44
ata7: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780400 irq 44
ata8: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780480 irq 44
ahci 0000:0c:00.2: enabling device (0000 -> 0002)
ahci 0000:0c:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0c:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 46
xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.7-1-ARCH xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.7-1-ARCH xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:0b:00.3: xHCI Host Controller
xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0b:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.15.7-1-ARCH xhci-hcd
usb usb5: SerialNumber: 0000:0b:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:0b:00.3: xHCI Host Controller
xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.15.7-1-ARCH xhci-hcd
usb usb6: SerialNumber: 0000:0b:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ata9: SATA link down (SStatus 0 SControl 300)
usb 1-5: new low-speed USB device number 2 using xhci_hcd
usb 5-2: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 850 PRO 128GB, EXM01B6Q, max UDMA/133
ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
usb 5-2: New USB device found, idVendor=1e7d, idProduct=319c
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: ROCCAT Isku
usb 5-2: Manufacturer: ROCCAT
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: ROCCAT ROCCAT Isku as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-2/5-2:1.0/0003:1E7D:319C.0001/input/input2
isku 0003:1E7D:319C.0001: input,hidraw0: USB HID v1.11 Keyboard [ROCCAT ROCCAT Isku] on usb-0000:0b:00.3-2/input0
input: ROCCAT ROCCAT Isku as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-2/5-2:1.1/0003:1E7D:319C.0002/input/input3
usb 1-5: New USB device found, idVendor=1e7d, idProduct=38a4
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: ROCCAT Kave Headset
usb 1-5: Manufacturer: HOLTEK
input: HOLTEK ROCCAT Kave Headset as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-5/1-5:1.0/0003:1E7D:38A4.0003/input/input4
usb 5-3: new high-speed USB device number 3 using xhci_hcd
isku 0003:1E7D:319C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [ROCCAT ROCCAT Isku] on usb-0000:0b:00.3-2/input1
hid-generic 0003:1E7D:38A4.0003: input,hidraw2: USB HID v1.10 Device [HOLTEK ROCCAT Kave Headset] on usb-0000:01:00.0-5/input0
usb 1-9: new full-speed USB device number 3 using xhci_hcd
usb 5-3: New USB device found, idVendor=05e3, idProduct=0608
usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-3: Product: USB2.0 Hub
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3593.249 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb698e952, max_idle_ns: 440795267109 ns
usb 5-4: new full-speed USB device number 4 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
usb 5-4: New USB device found, idVendor=1e7d, idProduct=2d51
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: ROCCAT Kone[+]
usb 5-4: Manufacturer: ROCCAT
usb 1-9: New USB device found, idVendor=28de, idProduct=1142
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: Steam Controller
usb 1-9: Manufacturer: Valve Software
input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-9/1-9:1.0/0003:28DE:1142.0004/input/input5
input: ROCCAT ROCCAT Kone[+] as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:1E7D:2D51.0005/input/input6
hid-generic 0003:28DE:1142.0004: input,hidraw3: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:01:00.0-9/input0
hid-generic 0003:28DE:1142.0007: hiddev1,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:01:00.0-9/input1
hid-generic 0003:28DE:1142.0008: hiddev2,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:01:00.0-9/input2
hid-generic 0003:28DE:1142.0009: hiddev3,hidraw6: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:01:00.0-9/input3
hid-generic 0003:28DE:1142.000A: hiddev4,hidraw7: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:01:00.0-9/input4
koneplus 0003:1E7D:2D51.0005: input,hiddev5,hidraw8: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone[+]] on usb-0000:0b:00.3-4/input0
input: ROCCAT ROCCAT Kone[+] as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-4/5-4:1.1/0003:1E7D:2D51.0006/input/input7
koneplus 0003:1E7D:2D51.0006: input,hidraw9: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone[+]] on usb-0000:0b:00.3-4/input1
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-8: ST1000DM003-1CH162, CC46, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC46 PQ: 0 ANSI: 5
ata4: SATA link down (SStatus 0 SControl 300)
clocksource: Switched to clocksource tsc
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sdb: sdb1
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] supports TCG Opal
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
sd 2:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
random: crng init done
acpi_cpufreq: overriding BIOS provided _PSD data
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
rtc_cmos 00:02: RTC can wake from S4
input: PC Speaker as /devices/platform/pcspkr/input/input8
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
sp5100_tco: I/O address 0x0cd6 already in use
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Linux agpgart interface v0.103
ccp 0000:0b:00.2: enabling device (0000 -> 0002)
ccp 0000:0b:00.2: ccp enabled
ccp 0000:0b:00.2: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
PTP clock support registered
mousedev: PS/2 mouse device common for all mice
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0a:00.1: Force to non-snoop mode
snd_hda_intel 0000:0c:00.3: enabling device (0000 -> 0002)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
asus_wmi: Number of fans: 1
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input10
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input13
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input14
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input15
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input16
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input17
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input18
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input19
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input20
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input21
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input22
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Found CRAT image with size=3920
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=16 id_base=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 8ca000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x1043:0x049E 0xCB).
[drm] register mmio base: 0xFE900000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 1022:1453 = 737903/e
[drm] probing mlw for device 1022:1453 = 737903
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
amdgpu 0000:0a:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: 115-C880PI00-101
[drm] GPU post is not needed
[drm] Changing default dispclk from 500Mhz to 600Mhz
[drm] vm size is 64 GB, block size is 13-bit, fragment size is 9-bit
amdgpu 0000:0a:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:0a:00.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits HBM
[TTM] Zone kernel: Available graphics memory: 8209584 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
amdgpu 0000:0a:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
amdgpu 0000:0a:00.0: fence driver on ring 0 use gpu addr 0x0000000000400040, cpu addr 0x0000000084cfcb97
amdgpu 0000:0a:00.0: fence driver on ring 1 use gpu addr 0x00000000004000c0, cpu addr 0x0000000089d1f9ea
amdgpu 0000:0a:00.0: fence driver on ring 2 use gpu addr 0x0000000000400140, cpu addr 0x00000000194131d2
amdgpu 0000:0a:00.0: fence driver on ring 3 use gpu addr 0x00000000004001c0, cpu addr 0x0000000088c5acab
amdgpu 0000:0a:00.0: fence driver on ring 4 use gpu addr 0x0000000000400240, cpu addr 0x00000000380bfd7d
amdgpu 0000:0a:00.0: fence driver on ring 5 use gpu addr 0x00000000004002c0, cpu addr 0x0000000014f332f8
amdgpu 0000:0a:00.0: fence driver on ring 6 use gpu addr 0x0000000000400340, cpu addr 0x0000000032b0e7d4
amdgpu 0000:0a:00.0: fence driver on ring 7 use gpu addr 0x00000000004003c0, cpu addr 0x00000000dfeef581
amdgpu 0000:0a:00.0: fence driver on ring 8 use gpu addr 0x0000000000400440, cpu addr 0x000000008cd85c7b
amdgpu 0000:0a:00.0: fence driver on ring 9 use gpu addr 0x00000000004004e0, cpu addr 0x0000000077394dfa
amdgpu 0000:0a:00.0: fence driver on ring 10 use gpu addr 0x0000000000400560, cpu addr 0x00000000a4b5eca7
amdgpu 0000:0a:00.0: fence driver on ring 11 use gpu addr 0x00000000004005e0, cpu addr 0x000000009023f556
[drm] Found UVD firmware Version: 1.87 Family ID: 12
amdgpu 0000:0a:00.0: fence driver on ring 12 use gpu addr 0x000000f40034be90, cpu addr 0x00000000780b9e90
[drm] Found VCE firmware Version: 53.20 Binary ID: 3
amdgpu 0000:0a:00.0: fence driver on ring 13 use gpu addr 0x00000000004006e0, cpu addr 0x000000008fc59c38
amdgpu 0000:0a:00.0: fence driver on ring 14 use gpu addr 0x0000000000400760, cpu addr 0x0000000063a55701
amdgpu 0000:0a:00.0: fence driver on ring 15 use gpu addr 0x00000000004007e0, cpu addr 0x000000002490c8f3
[drm] DC: create_links: connectors_num: physical:5, virtual:0
[drm] Display Core initialized!
pps pps0: new PPS source ptp0
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 60:45:cb:9a:b8:89
igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:04:00.0 enp4s0: renamed from eth0
[drm] ASUS VK266H: [Block 0]
[drm] ASUS VK266H: [Block 1]
[drm] dc_link_detect: manufacturer_id = 6904, product_id = 26A3, serial_number = 21FC5, manufacture_week = 26, manufacture_year = 19, display_name = ASUS VK266H, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[drm] SADs count is: -2, don't need to read it
[drm] VW222: [Block 0]
[drm] dc_link_detect: manufacturer_id = 6904, product_id = 22A2, serial_number = 1010101, manufacture_week = 43, manufacture_year = 17, display_name = VW222, speaker_flag = 0, audio_mode_count = 0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] ring test on 0 succeeded in 13 usecs
[drm] ring test on 9 succeeded in 7 usecs
[drm] ring test on 1 succeeded in 7 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 5 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
Adding 5242876k swap on /dev/sdc5. Priority:-2 extents:1 across:5242876k FS
[drm] ring test on 13 succeeded in 9 usecs
[drm] ring test on 14 succeeded in 3 usecs
[drm] ring test on 15 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] fb mappable at 0xE06CE000
[drm] vram apper at 0xE0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
[drm] {1920x1200, 2080x1235@154000Khz}
[drm] {1680x1050, 2240x1089@146250Khz}
Console: switching to colour frame buffer device 210x65
amdgpu 0000:0a:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:0a:00.0: kfd not supported on this ASIC
[drm] Initialized amdgpu 3.23.0 20150101 for 0000:0a:00.0 on minor 0
EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[360]: Received request to flush runtime journal from PID 1
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
fuse init (API version 7.26)
input: GaminggearUhidKeyboard as /devices/virtual/misc/uhid/0003:1E7D:FFFF.000B/input/input23
hid-generic 0003:1E7D:FFFF.000B: input,hidraw10: USB HID v0.01 Keyboard [GaminggearUhidKeyboard] on
input: GaminggearUhidMouse as /devices/virtual/misc/uhid/0003:1E7D:FFFF.000C/input/input24
hid-generic 0003:1E7D:FFFF.000C: input,hidraw11: USB HID v0.01 Mouse [GaminggearUhidMouse] on
input: GaminggearUhidMultimedia as /devices/virtual/misc/uhid/0003:1E7D:FFFF.000D/input/input25
hid-generic 0003:1E7D:FFFF.000D: input,hidraw12: USB HID v0.01 Device [GaminggearUhidMultimedia] on
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered